General Repair Of Gas Stove

1. Four-switch double-eye iron plate stove

The four-switch double-eye iron plate stove is opposite to the opening and closing handle of the two-switch double-eye iron plate stove, that is, when the handle is parallel to the stove surface, it is closed, and when it is perpendicular to the stove surface, it is fully open.

2. How to get the "burner"

Turn over the pot feet first, and then lift the burner slightly to remove it.

3. How to deal with "tight switch"

The cooktop panel can be removed, tap the top of the switch with the panel surface or a small hammer, and add a little lubrication to loosen it.

4. How to deal with "fire small"

The burner can be removed, and then ignite the fire on the nozzle, use a thin iron wire to burn it red, dredge it inward, and wait for the fire to emit a sizzling sound.

5. Daily maintenance and precautions of electronic ignition stove

① Since the electronic ignition is composed of piezoelectric ceramics and metal to form a circuit for ignition, the food that is usually burned should not be dripped on the stove, and the electrode part should be kept clean.

② Clean up the blockage of the burner in time.

③ When ignition is difficult, check whether the distance between the electrode and the stove is too large, whether the ignition hole is unblocked, whether the piezoelectric ceramics fail (weak fire), and whether the metal components fall off, etc. Otherwise, it should be reported to the affiliated office in time for repair.