Knowledge
-
20
Mar-2022
Common faults and treatment methods of gas stovesAfter the fire is lit, it will automatically turn off when you release your hand
-
19
Mar-2022
The function of the components of the gas cookerValve body assembly: mainly used for gas passage damper, pulse ignition switch control and gas flow regulation.
-
18
Mar-2022
The principle of ion induction gas stoveOpen the gas valve, press the knob, the contact of the micro switch is turned on, the pulse igniter starts to ignite continuously
-
17
Mar-2022
Ignition steps of gas cookerOpen the gas valve, press the knob, the knob rod rotates horizontally to the left, pushes the thimble in the valve body assembly to move down together
-
16
Mar-2022
The structure of domestic gas stoveIgnition part: mainly composed of pulse igniter or electronic igniter, electronic igniter refers to piezoelectric ceramic igniter.
-
15
Mar-2022
Basic knowledge of gas stovesPay attention to the regular inspection of whether the connection between the hose and the stove is leaking.
-
14
Mar-2022
How to use the gas stoveBefore using the gas stove, make sure that the installation of the stove is reliable and the connection of the connecting hose is firm and there is no air leakage.
-
13
Mar-2022
Use and maintenance of gas stovesAccording to national regulations, the service life of general household stoves is 8 years. After the expiration, the user should cancel it in time to avoid hidden dangers.
-
12
Mar-2022
Possibility Analysis of Main Causes of Gas Leakage from Gas CookersThe joint between the hose and the switch in front of the stove and the joint of the stove is not tight
-
11
Mar-2022
Maintenance of gas stovesThe distance between the cooker and the gas cylinder should be 50-100cm, the air intake pipe used should not be longer than 150cm
-
10
Mar-2022
Buying skills of gas cookerBuying skills must first be clear about the gas source used in your home, whether it is natural gas, artificial gas or liquefied petroleum gas.
-
09
Mar-2022
The main structure of the gas cookerThe combined type is divided into all stainless steel according to the shell material (both the panel, front panel
