Common faults and treatment methods of gas stoves

Press the knob, no fire

Reasons: 1. Bad battery contact or insufficient voltage, 2. Gas pressure is too high or too low, 3. Micro switch is broken, 4. There is a problem with the pulse igniter

Treatment method: 1. Adjust or replace the battery, 2. Adjust or replace the pressure reducing valve, 3. Replace the micro switch, 4. Replace the pulse igniter, 5. Replace the solenoid valve.

After the fire is lit, it will automatically turn off when you release your hand

Reasons: 1. The air pressure is too low or the gas has been used up, 2. The feedback needle is not positioned properly, 3. The feedback needle is broken, 4. There is a problem with the pulse igniter, 5. There is a problem with the solenoid valve.

Treatment methods: 1. Adjust or replace the pressure reducing valve or ventilation, 2. Adjust the position of the feedback needle, 3. Replace the feedback needle, 4. Replace the pulse igniter, and 5. Replace the solenoid valve.

Detonation when ignited

Reasons: 1. The battery voltage is insufficient, 2. The air pressure is too high, 3. The ignition needle is too high or too low from the fire hole of the fire cover, or the fire hole of the fire cover is not aligned with the fire needle. Plugged, 6-pulse igniter problem.

Treatment methods: 1. Replace the battery, 2. Adjust or replace the pressure reducing valve, 3. Adjust the position of the ignition needle or make the flame hole of the flame cover face the ignition needle, 4. Replace the ignition needle, 5. Clean the flame hole of the flame cover, and 6. Replace the pulse igniter.