News

What Should I Do If The Gas Stove Fails To Catch Fire?

Gas stoves are widely used in today's society. It is safe and convenient to use, and cooks food extremely quickly. It is favored by people in daily life. So, if the gas stove fails to catch fire during use, how should we solve it?


1. First check whether the gas source switch is on. If the bottled gas is out of gas, it is necessary to add gas.


2. Check whether the connecting hose is flattened or bent. If it is not flattened or bent, then you need to pick up the pot holder to see if there is fire at the ignition nozzle.


3. The pipeline is blocked, this is a very common problem. Once the pipeline is blocked, the gas outlet valve needs to be checked. Generally speaking, if you can smell the smell of gas and the stove cannot catch fire, it is likely that the gas is blocked. If the gas stove pipe is blocked, then it is necessary to clear the pipe or replace it.


4. Poor circuit contact, this is a problem that is easy to ignore, but it is often seen in many old users, mainly to check whether the positive and negative poles of the battery box are rusted, and whether the lines are in poor contact. If the circuit of the gas stove is in poor contact, it is necessary to remove the rust and connect the circuit accurately.


5. Overvoltage protection, many gas stoves have overvoltage protection function, once the overvoltage is over, it will not start. If the gas stove is over-pressure protected, it is necessary to replace the pressure reducing valve and try it.


6. The high-voltage line of the gas stove is aging. The stove has a high-voltage line and its connector. Once the high-voltage line is aging, it is easy to cause the cooker to fail to catch fire. At this time, it is only necessary to add a set of high-voltage protection, which should be observed more in normal life.


7. The position of the ignition needle of the gas stove is not correct. If the ignition needle of the gas stove is not properly positioned, the gas stove has certain requirements on the distance between the ignition needle and the fire cover. Once the distance is too large, the stove will not work. on fire. Generally speaking, the distance between the ignition needle and the fire cover is 4-6mm, and it should be aligned with the fire hole.


8. The micro switch is damaged. At this time, it is a small place in the gas stove, but it is more difficult to repair than usual failures. Generally speaking, it is not recommended for the owner to repair it by himself. The micro switch of the gas stove is damaged. This is a delicate and professional job, and it is best to ask a professional to solve it.


You Might Also Like

Send Inquiry