Gas stove purchase items

1. Products from designated factories should be purchased, which not only guarantees quality, but also facilitates maintenance .

2. Consider choosing products with high thermal efficiency, that is, energy-saving products.

3. Products that are convenient to use and easy to clean should be considered.

4. It should be asked clearly whether the product has spare parts, whether there is a maintenance department or special maintenance point, and after-sales service measures.

5. When purchasing, pay attention to the following points:

A. Appearance: Qualified products are generally more beautiful and delicate, while fake and inferior products are rough, and even have residual burrs and flashes. Under normal circumstances, the shell of "regular" products is made of imported steel with a thickness of 0.4-0.5 cm, while the shell of counterfeit products is generally thinner, which can be felt by looking at it and knocking it by hand. At the same time, it should be checked whether the stove surface is clean and undamaged, and whether the four supporting feet are firm.

B. Inspection: Carefully check the electronic ignition system of the cooker. Generally, the stainless steel electronic ignition stove is the piezoelectric ceramic electronic ignition. It should be checked whether the piezoelectric ceramic is complete, whether it is broken, whether the piezoelectric ceramic base is cracked, whether the wire is damaged or disconnected, and whether the switch knob is flexible and in place.

C. Debugging: A good gas stove has a high ignition hit rate, which is generally a hundred shots, while the fake and inferior products are the opposite. When trying to burn, it is necessary to observe whether the burner is large or not, and whether the smell of coal is heavy in the air. A good gas stove has a large burner, which can fully burn the gas and save energy. Unqualified products generally have a small burner and a large gas consumption. Because they cannot be fully burned, the gas smell is heavy. When observing, if the burner is light blue, it is normal, but it is abnormal if it turns yellow or black.